€25.99
% €30.40 (14.51% saved) previously €25.99
Available in 7 days, delivery time 2-5 days
Product information "LCN-K3 Issendorff KG"
Terminal Block
The LCN-K3 is a practical 3-pole terminal block designed for diagnostic plug connections in distribution boards. It is particularly suitable for systems where no LCN-PK is permanently installed. The terminal block allows for a simple and secure connection between various components of the LCN system.
Application Areas
The LCN-K3 is frequently used in building automation to enable flexible and modular wiring. It is ideal for use in distribution boards where quick and easy installation is required.
Technical Data
- Dimensions: 17mm x 75mm x 52mm (W x L x H)
- DIN Rail Mounting: 35mm, 1TE
- Protection Class: IP20
Manufacturer
ISSENDORFF KG
Wellweg 93
31157 Sarstedt (Werk 1)
Telefon: +49 5066 998-0
Telefax: +49 5066 998-899
Germany
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
Zubehör
Sensor module for DIN rail (standard) The LCN-SHS module from Issendorff KG is a state-of-the-art sensor module specifically designed for mounting on DIN rails. With its 8 button inputs, it allows for individual control of up to 64 target addresses and offers 192 different functions. This module is ideal for integration into modern building automation systems and allows for flexible adaptation to the specific needs of users. Application examples Control of lighting systems in residential and commercial spaces Integration of sensors for monitoring temperature, light, and motion Remote control of devices via pulse measurement inputs Automation of processes through programming of timers and status messages Technical data Integrated power supply: 230V ±15%, 0.4W, pulse-proof up to 4kV Dimensions: 38mm x 92mm x 66mm (W x L x H) DIN rail mounting: 35mm, 2 TE Protection class: IP20
previously €126.98
Segmentkoppler für große Systeme Der LCN-SK verbindet die Segmente miteinander (bis zu 250 Module pro Segment). Es können bis zu 120 Segmente aufgebaut werden. Mindestens 2 sind erforderlich. Zwei Prozessoren verhindern den Verlust von Datentelegrammen. Der Segmentkoppler arbeitet mit einer Übertragungsgeschwindigkeit von bis zu 2,5 Mbit/s. Die Segmentkoppler sind über ein verdrilltes Paar (CAT 5 Kabel) verbunden. Die Länge dieser Zweidrahtleitung kann insgesamt bis zu 800 m betragen. Je nach Länge des Datenkabels und der Anzahl der angeschlossenen Segmentkoppler können Repeater erforderlich sein. Wenn die volle Übertragungskapazität des Segmentbusses nicht benötigt wird, kann die Übertragungsgeschwindigkeit auf 1/4 oder 1/8 reduziert werden. Die Reichweite erstreckt sich dann bis zu 3 km ohne Repeater. Technische Daten Betriebsspannung: 230V ± 15% Integrierte Stromversorgung 230V ±15%, 3W, impulsfest bis 4kV Abmessungen: 85,5mm x 92mm x 66mm (B x L x H) 35mm Hutschienenmontage 5 TE Schutzklasse IP20
previously €649.99
Dali and Room Controller / Sensor Module for DIN Rail 2 TE The LCN-SHD module is a versatile DALI and room controller that can control up to 40 DALI ballasts in just two TE width. It allows the grouping of DALI devices into four DALI groups and offers additional individual commands for further ballasts. This module is particularly suitable for DALI control in individual rooms without requiring a complete DALI configuration. Application Examples Control of DALI-lit rooms in offices or living areas Integration of LCN sensors for automatic lighting adjustment Creation of light scenes for different usage scenarios Flexible adjustment of lighting conditions through extensive dimming and ramp functions Technical Data Operating mode 0-10 Volt: Load current maximum 40 mA per output Maximum 60 ballasts per output Source current: max. 0.5 mA/output Operating mode DALI DT0, DT6, DT8: Tunable White Maximum 40 devices with LCN-NDH Maximum 24 devices in LCN mode (Low Level) Maximum 9 devices in Standard mode (High Level)
previously €162.99
Issendorff LCN-VisuMod The LCN-VisuMod is a network coupling module with an interface to ModBus-IP. In addition to the functions of the LCN-VISU, the LCN-VisuMod offers an interface to ModBus. This allows the LCN-VisuMod to easily integrate ModBus devices that support the ModBus protocol into the LCN system. Application areas IP coupling with ModBus devices RTU coupling with ModBus devices (adapter required) Coupling to LCN-GVS LAN/WLAN coupling module Integrated visualization (Remote) maintenance of the LCN-PRO Technical data LCN-VISU (W x L x H): 37 x 92 x 66.5 mm 61.5 mm above the DIN rail Space requirement: 2 TE Mounting: REG on 35 mm DIN rail (DIN 50022) Manufacturer article number: 30366
previously €490.99
Relay module with six outputs for DIN rail The LCN-SR6 is a six-channel relay module of the LCN bus system that does not require a separate LCN bus module. With its relays, any consumers can be switched. The LCN-SR6 can be expanded to eight relays if needed with an LCN-R2H. Thanks to a button on the top, the relays can be switched manually. The module does not need to be parameterized for this. This allows the wiring on the construction site to be tested before the LCN system is set up. Application areas Control of any motors and drives Control of blinds and roller motor for shading and ventilation Control of any AC1 loads Hardware features 85 to 265 V, 50/60 Hz Six load relays with potential-free switching contacts as normally open and normally closed at 230 V~/16A, AC1 Maximum inrush current 70 A Plug-in relays I-connection for the operation of LCN-RR, IR remote control receiver, LCN-TS temperature sensor, LCN-PMI motion detector, LCN-GRT/-GBL/-GUS indoor sensors, LCN-ULT universal transponder reader, LCN-GTxD glass info module, LCN-BT4H, LCN-BU4L, binary and button sensor and more. P-connection as digital input/output for extensions such as relays, LCN-R2H, LCN-BS4 current sensors and more. Function description Operating programs The six relays are switched individually by command via the LCN bus. They can also be used to control roller shutter drives; the LCN-SR6 can be switched to roller shutter mode with the LCN-PRO. The relays support all common LCN functions, such as on/off/switching, timers, status commands, etc. For testing purposes, it is possible to switch the relays manually via a button on the top of the module, independently of the LCN bus. Connection of conventional buttons that distinguish short, long, and release: each 3 commands at 2 addresses (modules or groups). In total, there are 32 buttons in four tables. Further internally managed buttons result in a total of 480 commands to 160 different target addresses. Additional functions 12 variables for capturing measurement values Analog value processing via thresholds or controllers. Two freely parameterizable continuous controllers. Measurement values and control variables can be distributed arbitrarily in the bus. Transponder data processing for up to 16 transponders, unlimited when operating the visualization LCN-GVS. Control with dependencies and links, locking and releasing individual buttons, hierarchical permissions. Four timers (1 second to 45 days), two timers, periodic timer. Function acknowledgment: the execution is clearly confirmed Automatic generation of real status messages for visualization. Four-stage acknowledgment and reporting system. Bypass of power failures up to 20 seconds with power failure detection. Operating hour counters for all circuits
previously €227.99
DOMIQ - Base D-BL-2A (32MB) The DOMIQ Base D-BL-2A is the latest generation of the management module for building automation. With 32 MB of memory, it offers advanced features and an improved user interface. It enables the creation of complex automation rules and scenarios that respond to various conditions. Application Areas The DOMIQ Base D-BL-2A is suitable for demanding automation projects in residential and commercial properties that require high flexibility and adaptability. Technical Data Memory: 32 MB Integration: LCN system User Interface: intuitive and customizable Advanced Automation Features: Yes
previously €1,582.99
Issendorff LCN-EPKU2 Coupling module with USB interface for installation (OEM). The LCN-EPKU2 PC coupler is an active coupling module of the LCN bus system. It is equipped with a USB-C interface and has a connection to the LCN bus. The LCN-EPKU2 has its own processor and optimizes bus access even for those programs/operating systems that are not real-time capable. The LCN-PRO+ and the LCN-GVS communicate with the coupler at 12 times the speed. In addition, the LCN-EPKU2 contains extensive memory that allows bus captures for over 180,000 telegrams. Application Areas Active coupling module of the LCN bus system Directly connectable to the USB interface Seven diagnostic LEDs show the status
Coupling and visualization module for connection to a network The LCN-VISU is a combined visualization and network coupling module for the LCN bus. Communication takes place via LAN with RJ45 or WLAN. The coupler includes the LCN-PCHK service. It is compatible with all LCN bus modules from firmware 0701... (January 1997). Application areas Typical application areas of the LCN-VISU are: Remote maintenance with LCN-PRO Visualization with LCN-GVS Coupling with PCK protocol Visualization with OpenHAB The LCN-VISU serves as network access to the LCN system in LCN systems. Through this access, the LCN system is parameterized by the installer or coupled to other systems across trades. Another application case is the connection of the LCN visualization to the PC. With the system software LCN-GVS, direct and bidirectional data exchange occurs between LCN system states and direct control commands from the visualization PC. The new integrated OpenHAB visualization is quickly set up; it is automatically generated based on the labels and comments in the PCN-Pro programming. A connection of all devices available for the OpenHAB standard is also easily possible. Hardware equipment RJ-45 interface WLAN interface Connection to the LCN bus Optical status display of the operating state Note: It is not possible to access the LCN-VISU with two LCN-PRO of the same license. Function description The LCN-VISU supports two simultaneous PCHK connections to the LCN bus, allowing LCN-GVS and LCN-PRO to access the bus simultaneously. The PCHK monitor under Windows serves optionally for further configuration and monitoring of the LCN-VISU. For the third connection to the LCN bus, a full version LCN-PCHK license must be entered via the PCHK monitor. Each additional connection requires an upgrade license. Coupling LCN-PCKTo bring the data of a third-party application onto the LCN bus via LCN-PCK, this software is required. It buffers incoming and outgoing commands and messages, checks and translates them. The TCP/IP network is used as the communication link. This protocol works with simple ASCII character strings. An example: M000111A1100010 means module 111 in segment 000, output 1 at 100 with ramp 10. Feedback such as status or measurement values are also returned similarly simply and logically. This type of communication is quick and easy to implement in third-party applications. Date/Time With an existing internet connection, the LCN-VISU regularly resets the time. Thus, all LCN modules have the current time, which can be displayed on an LCN-GT4D/-GT10D. This function can be configured via the VISU web interface. Technical data Connection Supply voltage: 85V - 265V, 50/60 Hz Power consumption: 2 W Supply terminals: tool-free, solid max. 2.5 mm² or stranded with end sleeve max. 1.5 mm², through-wiring current max. 16 A Connection to the network LAN: RJ45 WLAN: 802.11b/g/n, WPA2 encrypted Installation Operating temperature: -10 to 40 °C Humidity: Max. 80% rel., non-condensing Environmental conditions: Use in fixed installation according to VDE 632, VDE 637 Protection class: IP20 The LCN-VISU galvanically isolates the LCN bus from the RJ45 socket up to 4kV. Scope of delivery: LCN-Visu
previously €352.99
DOMIQ - Base D-BL-1B (8MB) The DOMIQ Base D-BL-1B is a central control element for intelligent building automation. With 8 MB of memory, it provides the necessary capacity for managing automation processes and integrating various systems. The Base allows for user-friendly programming and customization to individual requirements. Application Areas The DOMIQ Base D-BL-1B is suitable for controlling lighting, heating, security systems, and other automation applications in residential and commercial properties. Technical Data Memory: 8 MB Integration: LCN system User interface: intuitive and customizable
Coupling module for connection to a network The LCN-PKE is a highly advanced network coupling module specifically designed for integration into the LCN bus system. It enables seamless communication over LAN via RJ45 or wirelessly via WLAN. With the LCN-PKE, users can efficiently control and monitor their LCN systems by connecting to various network services. Application Areas The LCN-PKE is used in numerous applications, including: Remote maintenance and monitoring with the LCN-PRO software, which allows for easy management and customization of LCN systems. Visualization of system states and control commands via the LCN-GVS software, which provides a user-friendly interface. Coupling with the PCK protocol to integrate data from third-party applications into the LCN system. The module acts as a central access point to the LCN system, allowing installers to parameterize the system and couple it with other systems. Another application case is the connection to the LCN visualization on the PC. With the LCN-GVS system software, bidirectional data exchange between the LCN system states and control commands from the visualization PC is enabled. Hardware Features RJ-45 interface for wired connections. WLAN interface for wireless communication. Direct connection to the LCN bus for easy integration. Optical status indicator showing the operational state of the module. Please note that access to the LCN-PKE with two LCN-PRO of the same license is not possible. Function Description The LCN-PKE supports up to two simultaneous PCHK connections to the LCN bus, allowing both LCN-GVS and LCN-PRO to access the bus at the same time. The PCHK monitor under Windows can optionally be used for configuration and monitoring of the LCN-PKE. For a third connection to the LCN bus, a full version of the LCN-PCHK license is required, and each additional connection requires an upgrade license. Coupling LCN-PCKTo transfer data from a third-party application via LCN-PCK to the LCN bus, the corresponding software is required. This software buffers incoming and outgoing commands and messages, checks and translates them for use in the LCN system. The communication connection uses the TCP/IP network, utilizing simple ASCII character strings. An example of a command could be: M000111A1100010, which means that module 111 in segment 000, output 1 is set to 100 with a ramp of 10. Feedback such as status or measurement values is also returned in a simple and logical format, making implementation in third-party applications easier. Date/TimeWith an existing internet connection, the LCN-PKE regularly updates the time, allowing all LCN modules to display the current time, which is particularly useful when this information is displayed on an LCN-GT4D or LCN-GT10D. This function can be configured via the PKE web interface. Technical Data Connection Supply voltage: 85V - 265V, 50/60 Hz Power consumption: 2 W Terminals/Wire type: tool-free, solid max. 2.5 mm² or stranded with ferrule max. 1.5 mm², through-wiring current max. 16 A Network Connection LAN: RJ45 WLAN: 802.11b/g/n, WPA2 encrypted Installation Operating temperature: -10 to 40 °C Humidity: Max. 80% rel., non-condensing Environmental conditions: Use in fixed installations according to VDE 632, VDE 637 Protection class: IP20 The LCN-PKE galvanically isolates the LCN bus up to 4 kV from the RJ45 socket, ensuring additional safety and reliability.
Issendorff LCN-SKU Segment coupler with USB connection for DIN rail The LCN-SKU segment coupler is a coupling module of the LCN bus system for connecting 2 to 120 LCN segments. It also provides the option to connect a PC directly via a USB connection to the segment bus and the local LCN bus. The LCN-SKU is an intelligent LCN bus module and features a processor with a buffer that ensures loss-free data transmission. It is typically mounted on a DIN rail in distribution cabinets. Application Areas The LCN-SKU is used to couple multiple LCN buses in large systems. Each individual LCN bus consists of a maximum of 250 intelligent LCN modules. These LCN modules represent an LCN segment. Up to 120 of these individual LCN segments can be coupled, allowing for up to 30,000 intelligent LCN modules to be used per object. Each module can communicate directly with any other via the segment bus.
previously €649.99
Universal Switch and Dimmer Module for DIN Rail 2 TE The LCN-SHU module is a flexible sensor/actuator module specifically designed for DIN rail mounting. It offers two switchable and dimmable electronic outputs for 230V, which can be operated as phase-cut or zero-voltage switches. Additionally, two more outputs are available in the software but not externally accessible. This module is ideal for use in dry rooms and allows for easy integration into existing systems. Application Examples Control of lighting systems in residential and commercial spaces Integration of sensors for automatic adjustment of lighting conditions Use as a dimmer for LED and halogen lamps Creating schedules for lighting control Technical Data Supply Voltage: 230VAC ±15% 50Hz/60Hz (110VAC optional) Power Consumption: 0.4W Switching Power: 300VA each (cosj=1) Dimensions (WxDxH): 38mm (2TE) x 92mm x 66.5mm Mounting: on 35mm DIN rail (DIN50022) Protection Class: IP20, max. 80% humidity, non-condensing
previously €248.99
DOMIQ - Base D-BL-1C (16MB) The DOMIQ Base D-BL-1C is an advanced version of the D-BL-1B module and offers 16 MB of memory. It is the centerpiece of building automation systems and allows comprehensive control and automation of various components in a building. Application Areas The DOMIQ Base D-BL-1C is suitable for complex automation projects that require higher memory capacity and is ideal for use in residential and commercial properties. Technical Data Memory: 16 MB Integration: LCN system User Interface: intuitive and customizable
Sensor/Actuator Module for DIN Rail (Standard) The LCN-SH module is a versatile sensor/actuator module designed for mounting on DIN rails. It offers two electronic switching outputs with a nominal voltage of 230V and a maximum load of 300VA. These outputs can be configured as both dimmable in phase-cut and as switches, allowing for flexible use. Application Areas Ideal for controlling lighting systems in residential and commercial spaces. Suitable for controlling roller shutters and blinds. Perfect for integration into complex automation systems. The module is equipped with a robust housing and has 8 button inputs that can control up to 64 target addresses with a total of 192 functions. An integrated pulse measurement input allows for the connection of remote control receivers and sensors. The built-in operating program includes functions for switching and dimming the outputs, with brightness and change speed adjustable separately. Additionally, programs for incandescent lamp dimming, slat adjustment, and roller shutter control are integrated. LCN System Bus Functions Communication with up to 30,000 modules, maximum 250 modules per bus level. Memory for up to 100 light scenes per output. Documentation and parameterization are stored in the module memory. Overload protection: The outputs switch off the consumers in case of excessive loads. Technical Data Integrated power supply: 230V ±15%, 0.4W, pulse-proof up to 4kV. Dimensions: 38mm x 92mm x 66mm (W x L x H). Mounting: DIN rail mounting (35mm, 4 TE). Protection class: IP20.
previously €194.99
Coupling Module for Connecting a PC or Notebook The LCN-PKU is an innovative coupling module that allows a direct connection between a PC or notebook and the LCN bus system. It is easily connected via the USB interface and provides galvanic isolation from the bus up to 2500V, ensuring additional safety. The module is equipped with 4 control LEDs that indicate the status of the LCN network and allow for easy monitoring of operation. It is ideal for use with the configuration software LCN-PRO or the visualization software LCN-GVS. Application Areas The LCN-PKU module is used in: Smart home installations for programming and monitoring devices. Professional applications where a reliable connection between PC and LCN bus system is required. Training and demonstrations where an easy connection to LCN systems is needed. Technical Data Integrated power supply: 230V ±15%, 0.4W, pulse-resistant up to 4kV Dimensions: 34.5mm x 92mm x 66mm (W x L x H) 35mm DIN rail mounting, 2 TE Protection class: IP20
previously €206.99
Relay module with six outputs for DIN rail The LCN-SR6G is a six-channel relay module of the LCN bus system that does not require a separate LCN bus module. Its relays can switch any consumers. The LCN-SR6G can be expanded to eight relays if needed with an LCN-R2H. Thanks to a button on the top, the relays can be switched manually. The module does not need to be parameterized for this. This allows the wiring to be checked on site before the LCN system is set up. Unlike the LCN-SR6, the relays of the LCN-SR6G have gold contacts, which are suitable for voltages below 20 V and currents below 100 mA. Application areas Control of any motors and drives Control of blinds and roller motors for shading and ventilation Control of any AC1 loads Function description Operating programs The six relays are switched individually via command over the LCN bus. They can also be used to control roller shutter drives; for this, the LCN-SR6G can be switched to roller shutter mode with the LCN-PRO. The relays support all common LCN functions, such as on/off/switching, timers, status commands, etc. For testing purposes, it is possible to switch the relays manually via a button on the top of the module, independently of the LCN bus. Connection of conventional buttons that distinguish short, long, and release: each 3 commands at 2 addresses (modules or groups). In total, there are 32 buttons in four tables. Additional internally managed buttons result in a total of 480 commands to 160 different target addresses. Additional functions 12 variables for capturing measurement values Analog value processing over thresholds or controllers. Two freely parameterizable continuous controllers. Measurement values and control variables can be distributed arbitrarily in the bus. Transponder data processing for up to 16 transponders, unlimited when operating the visualization LCN-GVS. Control with dependencies and links, locking and releasing individual buttons, hierarchical permissions. Four timers (1 second to 45 days), two timers, periodic timer. Function acknowledgment: execution is clearly confirmed Automatic generation of real status messages for visualization. Four-stage acknowledgment and reporting system. Bypass of power failures up to 20 seconds with power failure detection. Operating hour counters for all circuits Hardware equipment 85 to 265 V, 50/60 Hz Six load relays with potential-free switching contacts as opener and closer at 230 V~/16A, AC1 Maximum inrush current 70 A Plug-in relays I-connection for the operation of LCN-RR, IR remote control receiver, LCN-TS temperature sensor, LCN-PMI motion detector, LCN-GRT/-GBL/-GUS indoor sensors, LCN-ULT universal transponder reader, LCN-GTxD glass info module, LCN-BT4H, LCN-BU4L, binary and button sensor and others. P-connection as digital input/output for expansions such as relays, LCN-R2H, LCN-BS4 current sensors and others.
previously €269.99
LCN-PKU2 The LCN-PKU2 is an active coupler from USB-C to the LCN bus. It connects the LCN-PRO+, the LCN-GVS or third-party systems to the local bus at high speed. Thanks to the built-in processor, even (non-real-time capable) programs under Windows or Linux can access the bus without interference. When permanently installed, the LCN-PKU2 stores group names. This makes the entire documentation of the building retrievable. In addition, the LCN-PKU2 also records all bus traffic without a PC (configurable). Application Areas The LCN-PKU2 serves in LCN systems as a system access for laptops and PCs. Through this access, the parameterization of the LCN system is carried out by the installer. As a connection of the visualization on the PC. Using the system software LCN-GVS, direct and bidirectional data exchange between LCN system states and changes as well as direct control commands from the visualization PC takes place.
previously €202.99