LCN-GTS2TB Issendorff KG

Active Transponder System for Wall Mounting The LCN-ATW is an active transponder system designed for wall mounting. It provides access control with a long range and allows for comfortable door opening without the need for a conventional key. When a person approaches the antenna, the active transponder is activated and transmits its ID. Application Examples Automatic door opening in residential and commercial buildings. Integration into modern security systems. The LCN-ATW stores multiple transponders in the field and outputs them sequentially to the I-connection of a bus module. The transponders are available in various designs, including versions with buttons for remote control functions. Technical Data Dimensions: 160mm x 250mm x 90mm (W x H x D) Protection class: IP65

Transponder module for flush-mounted box The LCN-UT is an innovative transponder module designed for integration into flush-mounted boxes. It enables the detection of transponder cards and key fobs through an acoustic signal when brought near the module. Application examples Access control in residential and commercial buildings. Automation of lighting and security systems through transponder detection. A separate power supply is required for the operation of the LCN-UT, providing direct or alternating current of 10-18V, such as the LCN-NU16. The range of the module can be up to 28 cm depending on the antenna and transponder design. Technical data Dimension: Evaluation unit Ø 50mm x 20mm Dimension: Thickness of the antenna material 0.4mm Antennae in 3 dimensions 245mm Ø, 123mm Ø, 50mm Ø are included Protection class: IP20

Universal Reader for Transponders; in White The LCN-ULTW is a state-of-the-art reader suitable for both indoor and outdoor use, and can be installed in 68mm flush-mounted boxes. It detects transponders within the reading range and transmits the individual transponder ID to the I connection of the connected LCN module. Application Examples Access control to secured areas. Integration into smart home systems for device control. With the LCN-PRO or LCN-GVS software, individual permissions can be assigned to each transponder, allowing for flexible and secure use. Technical Data Dimension: Outer cover 80mm x 80mm Dimension: Installation height 11.7mm Dimension: Installation depth 27.7mm Connection cable: 5m Protection class: IP65

Universal Reader for Transponders; in Silver The LCN-ULTS is a versatile reader suitable for both indoor and outdoor use, designed for installation in 68mm flush-mounted boxes. It detects transponders within the reading range and transmits the individual transponder ID to the I connection of the connected LCN module. Application Examples Access control in commercial and private areas. Integration into modern building automation systems. With the LCN-PRO or LCN-GVS software, individual permissions can be assigned to each transponder, allowing for flexible handling. Technical Data Dimension: Outer cover 80mm x 80mm Dimension: Installation height 11.7mm Dimension: Installation depth 27.7mm Connection cable: 5m Protection class: IP65

Sensor/Actuator Module for Flush-Mounted Box Combined sensor/actuator module with two electronic switching outputs 230V, 300VA. Dimmable in phase-cut or as a switch (switches at zero crossing). The 8 button inputs can individually control 64 target addresses with 192 functions. Integrated pulse measurement input for remote control receivers. The built-in operating program includes the following functions: switching and dimming the outputs, brightness and change speed adjustable separately. Includes programs for incandescent lamp dimming, blinds, gates, etc. Evaluation via 5 thresholds (=10 commands) with hysteresis. Includes 2 continuous controllers that can be used independently and additionally for threshold processing. Two measured values can be recorded and controlled independently of each other. Decoding of the telegrams of the IR remote control receiver or transponder. Evaluation directly or via central computer. Functions for button levels, coded transmission, sender differentiation. Additional functions: control with dependencies, formation of links, counting, calculating, fixed and dynamic group formation, generation of automatic status messages (real feedback) for visualization. LCN System Bus Functions Communication with up to 30,000 modules, max. 250 modules per bus level. Protocol with collision avoidance Documentation and parameterization retrievable in the module memory 100 light scene memories available per output Connection options for EIB/KNX touch sensors (standard), DSI-Dali interface, relays Overload protection, the outputs switch off the consumers in case of excessive loads Note: UPP modules must not be connected directly to roller shutter or blind motors! The end switches or the triacs in the module may be damaged. The use of the isolation relay LCN-R2U is recommended here. A filter (LCN-FI1) is mandatory as soon as the electronic outputs of the LCN-UPP are used as dimmers. The interference filter is connected between the module and the consumer, it dampens the interference occurring during dimming, thus ensuring compliance with CE standards. Technical Data Integrated power supply 230V ±15%, 0.4W, pulse-proof up to 4kV. Flush-mounted housing connection via approx. 20cm long single wires 0.75mm². Dimensions: 50mm Ø x 20mm. Protection class IP20

LCN - Micro Match 4-pole 70cm double-locking plug, 4 pieces The LCN-IK70 is a high-quality connection cable equipped with double-locking plugs. With a length of 70 cm, it is ideal for connecting LCN devices in various installations. The 4-pole design allows for versatile applications in building automation. Application Examples Cabling of LCN components Expansion of existing systems Technical Data 4-pole locking plug Length: 70 cm Delivery: 4 pieces

Adapter for extending and duplicating the I-connection for the DIN rail The LCN-IVH is an extended version of the LCN-IV adapter, specifically designed for DIN rail mounting. It allows for the doubling of the I-connection and can also be combined with up to two LCN-IVH adapters to extend the range of the I-connection with IY(ST)Y 2x2x0.8mm up to 50m. The LCN-IVH additionally functions as a pulse sensor, evaluating a 5V signal via potential-free contacts. Application Areas This adapter is particularly useful in installations where multiple sensors need to be operated at a bus module. It enables flexible and decentralized installation of sensors such as remote control receivers, temperature sensors, and binary sensors. Technical Data Frequency: maximum 500 Hz Dimensions: 17mm x 92mm x 66mm (W x L x H) DIN rail mounting: 35mm, 1TE Protection class: IP20

This Tweezers The LCN-PINZ is a special tweezers designed for unlocking the LCN glass surface buttons. These buttons are equipped with a lateral locking pin that can be easily removed with the tweezers without causing damage. This greatly facilitates the installation and maintenance of the buttons. Application Examples Installation of LCN glass surface buttons Maintenance and replacement of buttons without damage Technical Data Ergonomic design for easy handling Material: High-quality plastic

Adapter for extending and duplicating the I-connection The LCN-IV is a versatile adapter used to extend and duplicate the I-connection. It allows the connection of up to two LCN-IV adapters to extend the I-connection with IY(ST)Y 2x2x0.8mm up to 50m. Additionally, the LCN-IVH functions as a pulse sensor that evaluates a 5V signal via potential-free contacts. Application Areas This adapter is ideal for applications where multiple sensors need to be operated on a bus module. It enables flexible and decentralized installation of sensors such as remote control receivers, temperature sensors, and binary sensors. Technical Data Frequency: maximum 500 Hz Dimensions: 14mm x 21mm x 12mm (W x L x H)