LCN-WIH Issendorff KG

Sensor module for DIN rail (standard) The LCN-SHS module from Issendorff KG is a state-of-the-art sensor module specifically designed for mounting on DIN rails. With its 8 button inputs, it allows for individual control of up to 64 target addresses and offers 192 different functions. This module is ideal for integration into modern building automation systems and allows for flexible adaptation to the specific needs of users. Application examples Control of lighting systems in residential and commercial spaces Integration of sensors for monitoring temperature, light, and motion Remote control of devices via pulse measurement inputs Automation of processes through programming of timers and status messages Technical data Integrated power supply: 230V ±15%, 0.4W, pulse-proof up to 4kV Dimensions: 38mm x 92mm x 66mm (W x L x H) DIN rail mounting: 35mm, 2 TE Protection class: IP20

Relay module with six outputs for DIN rail The LCN-SR6G is a six-channel relay module of the LCN bus system that does not require a separate LCN bus module. Its relays can switch any consumers. The LCN-SR6G can be expanded to eight relays if needed with an LCN-R2H. Thanks to a button on the top, the relays can be switched manually. The module does not need to be parameterized for this. This allows the wiring to be checked on site before the LCN system is set up. Unlike the LCN-SR6, the relays of the LCN-SR6G have gold contacts, which are suitable for voltages below 20 V and currents below 100 mA. Application areas Control of any motors and drives Control of blinds and roller motors for shading and ventilation Control of any AC1 loads Function description Operating programs The six relays are switched individually via command over the LCN bus. They can also be used to control roller shutter drives; for this, the LCN-SR6G can be switched to roller shutter mode with the LCN-PRO. The relays support all common LCN functions, such as on/off/switching, timers, status commands, etc. For testing purposes, it is possible to switch the relays manually via a button on the top of the module, independently of the LCN bus. Connection of conventional buttons that distinguish short, long, and release: each 3 commands at 2 addresses (modules or groups). In total, there are 32 buttons in four tables. Additional internally managed buttons result in a total of 480 commands to 160 different target addresses. Additional functions 12 variables for capturing measurement values Analog value processing over thresholds or controllers. Two freely parameterizable continuous controllers. Measurement values and control variables can be distributed arbitrarily in the bus. Transponder data processing for up to 16 transponders, unlimited when operating the visualization LCN-GVS. Control with dependencies and links, locking and releasing individual buttons, hierarchical permissions. Four timers (1 second to 45 days), two timers, periodic timer. Function acknowledgment: execution is clearly confirmed Automatic generation of real status messages for visualization. Four-stage acknowledgment and reporting system. Bypass of power failures up to 20 seconds with power failure detection. Operating hour counters for all circuits Hardware equipment 85 to 265 V, 50/60 Hz Six load relays with potential-free switching contacts as opener and closer at 230 V~/16A, AC1 Maximum inrush current 70 A Plug-in relays I-connection for the operation of LCN-RR, IR remote control receiver, LCN-TS temperature sensor, LCN-PMI motion detector, LCN-GRT/-GBL/-GUS indoor sensors, LCN-ULT universal transponder reader, LCN-GTxD glass info module, LCN-BT4H, LCN-BU4L, binary and button sensor and others. P-connection as digital input/output for expansions such as relays, LCN-R2H, LCN-BS4 current sensors and others.  

Universal Switch and Dimmer Module for DIN Rail 2 TE The LCN-SHU module is a flexible sensor/actuator module specifically designed for DIN rail mounting. It offers two switchable and dimmable electronic outputs for 230V, which can be operated as phase-cut or zero-voltage switches. Additionally, two more outputs are available in the software but not externally accessible. This module is ideal for use in dry rooms and allows for easy integration into existing systems. Application Examples Control of lighting systems in residential and commercial spaces Integration of sensors for automatic adjustment of lighting conditions Use as a dimmer for LED and halogen lamps Creating schedules for lighting control Technical Data Supply Voltage: 230VAC ±15% 50Hz/60Hz (110VAC optional) Power Consumption: 0.4W Switching Power: 300VA each (cosj=1) Dimensions (WxDxH): 38mm (2TE) x 92mm x 66.5mm Mounting: on 35mm DIN rail (DIN50022) Protection Class: IP20, max. 80% humidity, non-condensing

Dali and Room Controller / Sensor Module for DIN Rail 2 TE The LCN-SHD module is a versatile DALI and room controller that can control up to 40 DALI ballasts in just two TE width. It allows the grouping of DALI devices into four DALI groups and offers additional individual commands for further ballasts. This module is particularly suitable for DALI control in individual rooms without requiring a complete DALI configuration. Application Examples Control of DALI-lit rooms in offices or living areas Integration of LCN sensors for automatic lighting adjustment Creation of light scenes for different usage scenarios Flexible adjustment of lighting conditions through extensive dimming and ramp functions Technical Data Operating mode 0-10 Volt: Load current maximum 40 mA per output Maximum 60 ballasts per output Source current: max. 0.5 mA/output Operating mode DALI DT0, DT6, DT8: Tunable White Maximum 40 devices with LCN-NDH Maximum 24 devices in LCN mode (Low Level) Maximum 9 devices in Standard mode (High Level)

Sensor/Actuator Module for DIN Rail (Universal) The LCN-HU module from Issendorff KG is a state-of-the-art sensor/actuator module designed for mounting on DIN rails.

Relay module with six outputs for DIN rail The LCN-SR6 is a six-channel relay module of the LCN bus system that does not require a separate LCN bus module. With its relays, any consumers can be switched. The LCN-SR6 can be expanded to eight relays if needed with an LCN-R2H. Thanks to a button on the top, the relays can be switched manually. The module does not need to be parameterized for this. This allows the wiring on the construction site to be tested before the LCN system is set up. Application areas Control of any motors and drives Control of blinds and roller motor for shading and ventilation Control of any AC1 loads Hardware features 85 to 265 V, 50/60 Hz Six load relays with potential-free switching contacts as normally open and normally closed at 230 V~/16A, AC1 Maximum inrush current 70 A Plug-in relays I-connection for the operation of LCN-RR, IR remote control receiver, LCN-TS temperature sensor, LCN-PMI motion detector, LCN-GRT/-GBL/-GUS indoor sensors, LCN-ULT universal transponder reader, LCN-GTxD glass info module, LCN-BT4H, LCN-BU4L, binary and button sensor and more. P-connection as digital input/output for extensions such as relays, LCN-R2H, LCN-BS4 current sensors and more. Function description Operating programs The six relays are switched individually by command via the LCN bus. They can also be used to control roller shutter drives; the LCN-SR6 can be switched to roller shutter mode with the LCN-PRO. The relays support all common LCN functions, such as on/off/switching, timers, status commands, etc. For testing purposes, it is possible to switch the relays manually via a button on the top of the module, independently of the LCN bus. Connection of conventional buttons that distinguish short, long, and release: each 3 commands at 2 addresses (modules or groups). In total, there are 32 buttons in four tables. Further internally managed buttons result in a total of 480 commands to 160 different target addresses. Additional functions 12 variables for capturing measurement values Analog value processing via thresholds or controllers. Two freely parameterizable continuous controllers. Measurement values and control variables can be distributed arbitrarily in the bus. Transponder data processing for up to 16 transponders, unlimited when operating the visualization LCN-GVS. Control with dependencies and links, locking and releasing individual buttons, hierarchical permissions. Four timers (1 second to 45 days), two timers, periodic timer. Function acknowledgment: the execution is clearly confirmed Automatic generation of real status messages for visualization. Four-stage acknowledgment and reporting system. Bypass of power failures up to 20 seconds with power failure detection. Operating hour counters for all circuits  

Sensor/Actuator Module for DIN Rail (Standard) The LCN-SH module is a versatile sensor/actuator module designed for mounting on DIN rails. It offers two electronic switching outputs with a nominal voltage of 230V and a maximum load of 300VA. These outputs can be configured as both dimmable in phase-cut and as switches, allowing for flexible use. Application Areas Ideal for controlling lighting systems in residential and commercial spaces. Suitable for controlling roller shutters and blinds. Perfect for integration into complex automation systems. The module is equipped with a robust housing and has 8 button inputs that can control up to 64 target addresses with a total of 192 functions. An integrated pulse measurement input allows for the connection of remote control receivers and sensors. The built-in operating program includes functions for switching and dimming the outputs, with brightness and change speed adjustable separately. Additionally, programs for incandescent lamp dimming, slat adjustment, and roller shutter control are integrated. LCN System Bus Functions Communication with up to 30,000 modules, maximum 250 modules per bus level. Memory for up to 100 light scenes per output. Documentation and parameterization are stored in the module memory. Overload protection: The outputs switch off the consumers in case of excessive loads. Technical Data Integrated power supply: 230V ±15%, 0.4W, pulse-proof up to 4kV. Dimensions: 38mm x 92mm x 66mm (W x L x H). Mounting: DIN rail mounting (35mm, 4 TE). Protection class: IP20.