LCN-TE2 Issendoroff KG

LCN-TL6 Switch Converter for GIRA SPS Switches for Flush-Mounting Box The LCN-TL6 is a specialized switch converter designed for use with GIRA SPS switches. It allows for the evaluation of 1 or 3-button switches and offers individual control of the 6 status LEDs via the T connection. Configuration is done through the LCN-PRO software, which provides a variety of control options such as On, Off, Blink, and Flicker. Application Areas This switch converter is ideal for use in modern building management systems, where it enables precise control of lighting and other electrical devices. It can be used in combination with GIRA SPS switches to ensure user-friendly control. Notes The LCN-TL6 is automatically recognized by modules with firmware version 1B07 or higher. Older modules require manual settings to utilize the LCN-TL6. Technical Data Dimensions: 68mm x 92mm x 66mm (W x L x H) Protection Class: IP20

Adapter cable for the combined connection of EIB/KNX 3- and 4-fold touch sensors with 1-fold touch sensors The LCN-TE1 is an innovative adapter cable that allows the simultaneous connection of 3- and 4-fold EIB/KNX touch sensors as well as 1-fold touch sensors to LCN modules. It is simply connected to the T-connection of an LCN module and supports a variety of standard touch sensors from leading manufacturers such as Gira, Jung, Berker, Merten, Busch-Jäger, Siemens, Legrand, and Peha. Application Areas Ideal for integrating various touch sensors into an LCN system to enable comprehensive control of lighting and other electrical devices. The LCN-TE1 is particularly useful in combination with the LCN-TEU to enhance the flexibility and adaptability of the system. Technical Data Dimensions: 70mm x 70mm x 15mm  (W x L x H) Protection class: IP20

KNX Switch Adapter for Flush Mounting Box The LCN-TXR connects the LCN bus with KNX switches. It includes a KNX power supply and a USB interface for direct connection to the KNX programming software ETS. Application Areas The LCN-TXR can connect up to two KNX switches with LCN. The LCN-TXR evaluates the individual switches and measurement values of the switch and can also control the display LEDs and displays. The existing I-connection connects the LCN-TXR to an LCN bus module. To use the LCN-TXR as a KNX programming adapter, you need ETS.