LCN-A4H Issendorff KG

Dali and Room Controller / Sensor Module for DIN Rail 2 TE The LCN-SHD module is a versatile DALI and room controller that can control up to 40 DALI ballasts in just two TE width. It allows the grouping of DALI devices into four DALI groups and provides additional individual commands for further ballasts. This module is particularly suitable for DALI control in individual rooms without requiring a complete DALI configuration. Application Examples Control of DALI-lit rooms in offices or living areas Integration of LCN sensors for automatic adjustment of lighting Creation of light scenes for different usage scenarios Flexible adjustment of lighting conditions through extensive dimming and ramp functions Technical Data Operating mode 0-10 Volt: Load current maximum 40 mA per output Maximum 60 ballasts per output Source current: max. 0.5 mA/output Operating mode DALI DT0, DT6, DT8: Tunable White Maximum 40 operating devices with LCN-NDH Maximum 24 operating devices in LCN mode (low level) Maximum 9 operating devices in standard mode (high level)

Universal Switching and Dimming Module for DIN Rail 2 TE The LCN-SHU module is a flexible sensor/actuator module specifically designed for DIN rail mounting. It offers two switchable and dimmable electronic outputs for 230V, which can be operated as both phase-cut and zero-crossing switches. Additionally, two more outputs are available in the software but are not externally accessible. This module is ideal for use in dry rooms and allows for easy integration into existing systems. Application Examples Control of lighting systems in residential and commercial spaces Integration of sensors for automatic adjustment of lighting conditions Use as a dimmer for LED and halogen lamps Creation of schedules for lighting control Technical Data Supply voltage: 230VAC ±15% 50Hz/60Hz (110VAC optional) Power consumption: 0.4W Switching power: 300VA each (cosj=1) Dimensions (WxDxH): 38mm (2TE) x 92mm x 66.5mm Mounting: on 35mm DIN rail (DIN50022) Protection class: IP20, max. 80% humidity, non-condensing

Sensor/Actuator Module for DIN Rail (Universal) The LCN-HU module from Issendorff KG is a state-of-the-art sensor/actuator module specifically designed for mounting on DIN rails. It combines the functions of a sensor and an actuator in a compact device, providing a flexible solution for building automation. Application Examples This module is ideally suited for controlling lighting systems, blinds, and other electrical devices in modern residential and commercial buildings. Thanks to its versatile connection options, it can be used in various automation scenarios, such as in smart homes, office buildings, or industrial applications. Technical Data Integrated power supply: 230V ±15%, 0.4W, pulse-proof up to 4kV Dimensions: 85.5mm x 92mm x 66mm (W x L x H) 35 mm DIN rail mounting: 5 TE Protection class: IP20 Maximum load: 500VA Dimmable outputs: phase-cut Connection options: 0..10V, DSI, DALI Maximum number of target addresses: 64 Maximum number of functions: 192 Integrated radio interference suppression Automatic fuse detection Pulse measurement input for remote control receivers and sensors Support for up to 8 relays and 8 binary inputs The LCN-HU module is thus the ideal solution for modern building automation systems, offering high flexibility and numerous functions for controlling and monitoring electrical systems.

Sensor Module for DIN Rail (Standard) The LCN-SHS module from Issendorff KG is a state-of-the-art sensor module specifically designed for mounting on DIN rails. With its 8 button inputs, it allows for individual control of up to 64 target addresses and offers 192 different functions. This module is ideal for integration into modern building automation systems and allows for flexible adaptation to the specific requirements of users. Application Examples Control of lighting systems in residential and commercial spaces Integration of sensors for monitoring temperature, light, and motion Remote control of devices via pulse measurement inputs Automation of processes through programming of timers and status messages Technical Data Integrated power supply: 230V ±15%, 0.4W, pulse-proof up to 4kV Dimensions: 38mm x 92mm x 66mm (W x L x H) DIN rail mounting: 35mm, 2 TE Protection class: IP20

Sensor/Actuator Module for DIN Rail (Standard) The LCN-SH module is a versatile sensor/actuator module designed for mounting on DIN rails. It offers two electronic switching outputs with a nominal voltage of 230V and a maximum load of 300VA. These outputs can be configured as both dimmable in phase-cut and as switches, allowing for flexible use. Application Areas Ideal for controlling lighting systems in residential and commercial spaces. Suitable for controlling roller shutters and blinds. Perfect for integration into complex automation systems. The module is equipped with a robust housing and features 8 button inputs that can control up to 64 target addresses with a total of 192 functions. An integrated pulse measurement input allows for the connection of remote control receivers and sensors. The built-in operating program includes functions for switching and dimming the outputs, with brightness and change speed adjustable separately. Additionally, programs for incandescent lamp dimming, slat adjustment, and roller shutter control are integrated. LCN System Bus Functions Communication with up to 30,000 modules, maximum 250 modules per bus level. Memory for up to 100 lighting scenes per output. Documentation and parameterization are stored in the module memory. Overload protection: Outputs switch off consumers in case of excessive loads. Technical Data Integrated power supply: 230V ±15%, 0.4W, pulse-proof up to 4kV. Dimensions: 38mm x 92mm x 66mm (W x L x H). Mounting: DIN rail mounting (35mm, 4 TE). Protection class: IP20.