Tomadas embutidas
LCN-R1U Issendorff KG
Relay module with 1 x 16A changeover contact The LCN-R1U is a compact relay module designed for switching electrical devices at the T-connection of an LCN module. With a changeover contact, this module allows for simple and effective control of electrical devices. The relay is ideal for applications where direct control of sockets or heating actuators is required. The T-connection is looped through, allowing for expansion with additional peripheral devices. Application examples Control of sockets in living spaces Automation of heating actuators Integration into smart home systems for central control Technical data Operating and status LED Integrated power supply: 230V ±15%, 0.35W Relay type: changeover contact 230V/16A, AC1 (resistive load) Maximum inrush current: 70A Operating current: 100mA-16A Dimensions: Ø 50mm x 20mm Protection class: IP20
LCN-R2U Issendorff KG
Relay module with 2 x 8A normally open contacts for flush-mounted installation The LCN-R2U is an innovative flush-mounted module equipped with two load relays, each with potential-free contacts. This module is specifically designed for controlling electrical devices whose power consumption exceeds 2x 300VA of the LCN-UPP module. It is important to note that the contact load must be at least 12V/100mA or 230V/8A. The LCN-R2U should not be connected directly to roller shutter or blind motors, as this may damage the limit switches or triacs in the module. Instead, the use of the LCN-R2U relay is recommended for safe control. Application examples Control of lighting systems in residential and commercial spaces Automation of electrical devices in smart homes Integration into existing LCN systems to expand control options Technical data Operating and status LED Integrated power supply: 230V ±15%, 0.4W Relay type: normally open contact 230V/8A, AC1 (resistive load) Max. inrush current: 30A Operating current: 100mA-16A Dimensions: Ø 50mm x 20mm Protection class: IP20
LCN-AO1R Issendorff KG
Analog Output Module 0-10V The LCN-AO1R is a highly developed analog output module specifically designed for integration into the Local Control Network (LCN). It converts a dimmed phase of an LCN flush-mounted module (UPP) directly into an analog 0-10V (1-10V) control signal. This allows precise control of dimmable electronic ballasts (EVGs) that operate with a 0-10V control voltage. Application Examples Control of LED drivers and dimmable lights in residential and commercial spaces. Integration into smart home systems for automatic adjustment of lighting. Use in presentation rooms for optimal light control. Technical Data Dimension: ø 52mm x 20mm Protection class: IP20 Output voltage: 0-10V 230V switched output for powering EVGs
LCN-DDR Issendorff KG
DALI-DSI Interface for Digital Electronic Ballasts The LCN-DDR module is a highly developed interface specifically designed for controlling digital ballasts (EVG). It allows connection to the T connection of an LCN-UP module, with this connection being used for the pass-through of additional peripheral devices. In DALI mode, up to 16 EVGs can be controlled via 3 channels, allowing for flexible and efficient control of lighting systems. In DSI mode, up to 10 EVGs can be controlled per channel, further increasing the adaptability of the system. Technical Data Dimension: Ø 52mm x 20mm Protection class: IP20